Brakes are one of the essential components of any vehicle. Without them, it would be impossible to bring your car to a stop. However, brake failure is still a common problem, even with regular maintenance.
In this blog post, we’ll explore the top seven causes of brake failure and how to prevent them from too much brake repair.
Worn Brake Pads
Worn brake pads are the most common cause of brake failure. As brake pads wear down, they no longer provide the same stopping power and can eventually fail. To avoid this issue, inspect your brakes regularly and plan brake repair as needed.
Contaminated Brake Fluid
Brake fluid can become contaminated over time, decreasing braking power and eventually leading to failure. To prevent this, check your brake fluid regularly and replace it as necessary.
Improperly Adjusted Brake Calipers
If the brake calipers are not adjusted properly, they can cause the brakes to wear unevenly and eventually lead to brake failure. Make sure to have your brakes inspected and changed regularly.
Leaking Brake Lines
Leaking brake lines can cause a decrease in braking power and eventually lead to brake failure. If you catch any signs of a leak, make sure to have it repaired immediately.
Worn rotors can cause the brakes to vibrate, eventually leading to failure. To prevent this, inspect your rotors regularly and undergo brake repair as needed.
Improperly Adjusted Brake Shoes
If the brake shoes are not adjusted properly, they can cause the brakes to wear unevenly and eventually lead to brake failure. Make sure to have your brakes inspected and changed regularly.
Excessive heat can cause brake components to break down and eventually fail. To prevent this, take breaks while driving and avoid overloading your vehicle with weight.
5 Ways to Prevent Brake Failure
Driving safety is of utmost importance, and one of the essential components of ensuring a safe driver is a properly functioning braking system. Brake failure can occur for various reasons and cause an accident if not addressed in time. To avoid this, here are five ways to ensure a safe and reliable braking system:
An essential way to prevent brake failure is to regularly maintain the braking system by having it inspected by a certified mechanic. This will allow them to check if the brake fluid is at the right level, the brake pads and rotors are in good condition, and the brake lines are corrosion-free.
Check Brake Fluid
Checking the brake fluid is integral to regular maintenance as it helps ensure the brakes are functioning correctly. The brake fluid should be at the right level, and its color should be clear. If the brake fluid gets too low or its color changes, it’s time to get the brakes inspected by a certified mechanic.
Check Brake Pads
Brake pads should be checked regularly to ensure they are in good condition. If the pads are worn out, it’s time to replace them as soon as possible.
Check Brake Rotors
Brake rotors should also be checked regularly to ensure they are in good condition. If the rotors are worn out, they should be replaced as soon as possible to prevent brake failure.
Replace Brake Lines
Brake lines should be checked regularly and replaced if they are corrupted or damaged. This is a crucial step to ensure that the brakes are functioning correctly and prevent brake failure.
Following the steps outlined above, you can ensure that your brakes remain in top condition and avoid any potential issues. Regular maintenance is vital to prevent brake failure, so ensure your brakes are regularly inspected.
Automed Car Care is a reliable and committed service provider for car and brake repair in West Los Angeles and Culver City. We specialize in American and Japanese vehicles, and our experienced mechanics have the knowledge and skill to get the job done precisely on time. We offer various services, including brake repairs, oil changes, battery repairs, and more. If you are looking for quality brake repair services, contact us today and let us take care of your car repair needs.